VSI5X series crusher

vsi5x_crusher

vsi5x_crusher

Introduction

Based on the German technology and year’s further research ,our company has developed this kind of new high-effiency crusher .And it has integrated the three types of crushing into a single whole with every performance reachhing the world-class level .and mow it has become a key equipment in the sand-making industry.

Main Structures

It consists of riveted frame base,main shaft assembly ,rotator assembly ,transmission motor assembly,frame,hydraulic jacking assembly and double sides’falsework.Auxiliary parts :electrical system ,lubrication system.

Structure features

1. Optimized design improves crushing effiency:

(1) Convertible distributor simplifies the operation.

(2) Optimized deep-cavity rotor improve the material throughput by a lot.

(3) Advanced shoot opening and fluent inner curve reduce the flowing resistance which improve the throughput by large extent.

2. Technological precedence leads industry high-standard:

(1) Adopting international famous brand bearing from Japan, Sweden, America and so on.

(2) The hydraulic uncap assembly adopts Japanese imported with original packaging parts which make the maintenance easier and more convenient.

(3) Adopting high protection standard motor with high efficiency and low noise. The motor accords with IEC standard, F insulation, IP 54/55 protection standard.And the core wear resistant material adopts the American high-standard wear resistant material.

3. Updated quality extends service life and reduces cost:

(1) Part-worn around protecting plate can be reversed end for end to use again which improve the operating factor .

(2) Adopting the lozenge impact plate protects the frame better.

(3) Assembled hammer reduces the cost by more than 30%. In addition, adding the assistant hammer which protects the frame when the main hammer is worn.

(4) Airproof structure of main axle end avoids oil leaking without felt washer.

Working Principle

Feeding at center :

The material falls down into the feed hopper ,and then enter the high speed impeller through the central feeding hopper ,and at last they will be throwen out from the impeller.The materials strike with the materials that are freely falling down and then crush togetherly to the vortex liner and are rebounded to the top of vortex cavity ,and then falling down. The falling materials with the shoot materials form a continuous materials curtain .After several this kind of repeating , the final materials will be discharged from the discharging opening .

Feeding both at center and sides:

Raw material falls down into the feed hopper and the circle ring, and then they are divided into two divisions by the distributing plate. One enters the high speed impellor and then theywill be accelerated and thrown out from the impeller. The other falls down from the sides of distributing plate. Then this two kinds of materials will crush with each other, and then strike togetherly to the vortex liner and are rebounded to the top of vortex cavity ,and then falling down. The falling materials with the shoot materials form a continuous materials curtain .After several this kind of repeating , the final materials will be discharged from the discharging opening .

Technical Data:

Model

VSI5X7615

VSI5X8522

VSI5X9532

VSI5X1145

Throughput capacity(t/h)

Feed both at center and sides

150~280

240~380

350~540

500~640

Feed

70~140

120~200

180~280

250~360

Max feed size (mm)

soft materials

<35

<40

<45

<50

Hard materials

<30

<35

<40

<45

rotation speed(r/min)

1700~1900

1500~1700

1300~1510

1100~1310

Double motor power (kw)

110~150

180~220

260~320

400~440

Overall dimension L*W*H (mm)

3700×2200
×2300

4140×2300
×2700

4560×2500
×2900

5000×2700
×3400

weight(t)

8.6

11.8

17.5

27.5

Power supply

380v,50Hz

Light-oil
lubrication station

Power of double lubropump motor

2X0.31kW

safety protection

Double complementary lubropumps supply oil. Auto-stop without oil flow. Water-cool system. Motor-heating for winter.

Oil-tank heating power

2kW

Overall dimension L*W*H (mm)

820X520X1270

If there is change of the above specification, it subjects to the newest products' specifications.