PCL series crusher

pcl_crusher

pcl_crusher

Introduction

PCL-Vertical Shaft Impact Crusher is applied widely for the powder process of mineral product including mental and non-metal ore, fireproof material, bauxite, diamond dust, glass raw materials, architectural materials, artificial sand and all kinds of metal ore materials, especially which has more advantages than any other machines in processing the more and most hard materials.

Structure Features

1. Simple structure and low cost

2. High efficiency and low consumption

3. Primary and second crushing capacity

4. More and most hard materials can be crushed

5. Cubic shaped final product

6. Little noise and dust pollution

7. Convenient performance, maintenance, installation

Working Principle

The Whole PCL vertical shaft impact crusher includes feed hopper, classifier, whirl pool cavity, impeller, main bearing assembly base, transmission device and motor etc. Operating principle is as follows: the materials enter the crusher through feeder hopper, which is divided into two parts, one part through the middle of classifier entering into the rotating impeller at high speed, then accelerated, whose speed can reach hundreds of acceleration, then is shot through the tunnels around the impeller by the speed of 60-75 meter/second. First the materials will impact with some materials fallen around classifier, then impact on the whirlpool cavity’s scaleboard together, then will be rebounded and impact on the top of the whirlpool cavity, then changes its direction and goes down, forms continual material layers with the materials shot from the impeller. Therefore some materials will be impacted, crusher, milled twice or more times in the whirlpool cavity, then crushed materials will be excluded through the bottom discharging hole. This can from a closed circulation through the circular classifier system; in general, materials can be crushed into 20 mesh through thrice circulation. Airflow self-circulation in the whirlpool cavity can eliminate the dust pollution well.

Technical Data:

Model

Max. feeding(mm)

Power(Kw)

Impeller speed (r/min)

Output
(t/h)

Outer dimension
:L×W×H(mm)

Weight(T)

PCL-600

30

2×30

2000-3000

12-30

3000×1500×2050

5.6

PCL-750

35

2×45

1500-2500

25-55

3300×1800×2440

7.3

PCL-900

40

2×55

1200-2000

55-100

3600×2140×2620

12.1

PCL-900B

40

2×75

1000-1450

65-130

3600×2140×2620

13.6
PCL-1050
45
2×(90-110)
1000-1700
100-160
4480×2450×3906
16.9
PCL-1250
45
2×(132-180)
850-1450
160-300
4520×2640×3100
22
PCL-1350
50
2×(180-220)
800-1193
200-360
5340×2940×3650
26

If there is change of the above specification, it subjects to the newest products' specifications.