Impact crusher
Introduction
With the advanced technology from the home and abroad ,impact crusher have been designed to deal with the material with the side length 500mm, and less than 350Mpa anti-pressure strength. It features the high crushing ratio ,high effient,and material with the cubic shape after the crush. It can be used to crush the mid and hardness material (such as the limestone ) with the advantages of high production ccapacity and small size of the product .
Main Application
Used in the first and secondary crushing ,Impact Crusher can deal with the material with the side length 500mm, less than 350Mpa anti-pressure strength. and It is widely used in water and electricity, expressway, sand and stone, crushing fields.
Structure Features
Impact Crusher features many advantages: simple structure, non-key connection, high chromium flat hammer, special impact plate, simplified crushing process, and high-efficiency and energy conservation, cubic shape for the final products ,as well as the convenient maintenance and reliable operation. The discharging opening can also be adjusted.
Working Principle
This impact crushes materials with impact force. When the materials enter the blow bar area, they are crushed due to the high-speed impact of the blow bar and are thrown to the impact plates on the rotor for secondary crush. Then the materials will be shot back to the blow bar again for the third crush. This process will repeat until the materials are crushed to the required size and discharged from the lower part of the machine. The size and shape of the finished powder can be changed by adjusting the gap between the impact rack and rotor support. The machine employs self-weight security device in its back frame. When other objects enter the impact cavity, they will be forced out of the machine by the impact rack in the front and back of the machine.
Technical Data:
Type |
Spec. |
Feeder Opening(mm) |
Feeding Size (mm) |
Crushing |
Motor |
Weight |
PF-1010 |
Φ1000×1050 |
400×1080 |
350 |
50-80 |
55-75 |
12.6 |
PF-1210 |
Φ1250×1050 |
400×1080 |
350 |
70-120 |
110-132 |
14 |
PF-1214 |
Φ1250×1400 |
400×1430 |
350 |
80-160 |
132-160 |
18.58 |
PF-1315 |
Φ1300×1500 |
860×1520 |
500 |
160-260 |
180-260 |
24.2 |
If there is change of the above specification, it subjects to the newest products' specifications.