Hammer crusher

hammer_crusher

hammer_crusher

Introduction

Hammer Crusher is used for grinding the medium-hard and low-abrasive materials with their pressure resistance strength blow 100Mpa ,and humidity lower than 18%. And these materials include the coal ,salt,plaster,tile,limestone and so on .

Main structures

It consists of frame ,rotor, grizzly bar, Impeller bar,and other adjustment equipment .

Working Principle

1. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are crushed to small sizes by the high-speed hammer ,with the process of pressing, impacting , cuting and grinding.

2. There is a screening plate under the rotor, which make sure the materials with size smaller than the screen mesh will be screened out and others will be left to be further hammered and ground until they fufill the standard size.

3. The size of the final products can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirements.

Technical Data:

Model

Input size
(mm)

Output size
(mm)

Capacity(t/h)

Power(Kw)

Weight(t)

PC 400×300

<100

<15

5-10

11

0.8

PC 600×400

<220

<15

10-25

22

1.5

PC 800×600

<350

<15

20-50

55

4.7

PC 800×1000

<400

<15

20-75

110

7.9

If there is change of the above specification, it subjects to the newest products' specifications.