Hydraulic impact crusher

hydraulic_impact_crusher

hydraulic_impact_crusher

Introduction

This machine is suitable for the soft ,mid and hardness rocks and widely applied to the field of mining,metallurgy,fireproof materials ,and chemistry .And it can also be used in the highway ,construction stone crushing, water conservancy project and other areas.

Structure Features

1. Advanced manufacturing materials ;world-class crafts.

2. The rotor adopts the heavy dsign and the serious testing way .

3. Unique fixed way of the hammer.

4. The size of the bearing is bigger and so it is the bearing capacity.

5. The bearing seat adopts the integrative cast steel structure ,which can greatly strengthen its radial strength .

Working Principle

This machine uses the impact energy to crush the materials and it can change the granularity and size by adjusting the spare between the impact and rotor frame .and this machine adopts the spring secure equipment installed behind the impact plate. And when the non-crushing materials enter the crushing cavity ,the front and back impact plate will retreat and then be discharged .

1. As it enters the hammer areas ,the materials will be crushed as the high-speed impact from the hammer.And at the same time,they will be thrown into the impact equipment installed on the rotors,and then the secondary crush will begin.

2. After the secondary crushing,the materials will rebound to the hammer areas from the Impact Plate to be recrushed .This process will be circled ,until the materials reanch the specific sized .

3. The final products will be discharged from the discharging opening .

Technical Data:

Table1(with three cavities):

Model Specification

Feed opening

(mm)

Max feeding size(mm)

capacity

(t/h)

Motor power(kW) Weight(t) Overall Dimension(mm)
PFW1210Ⅲ Ф1150X960 570X990 250 70-120 90-110 15.0 2550X1870X2100
PFW1214Ⅲ Ф1150X1400 570X1430 250 90-170 132-160 19.0 2550X2310X2100
PFW1315Ⅲ Ф1300X1500 625X1530 300 180-270 160-200 25.0 2960X2570X2380
PFW1318Ⅲ Ф1300X1800 625X1830 300 220-300 200-250 30.0 2960X2870X2380

Table2(with two cavities):

Model pecification

Feed opening

(mm)

Max feeding size(mm)

capacity

(t/h)

Motor power

(kW)

Weight

(t)

Overall Dimension

(mm)

PFW1210II Ф1150X960 1100X1030 400 90-160 90-110 17.0 2400X1870X2550
PFW1214II Ф1150X1400 1100X1430 500 130-200 132-160 22.0 2400X2310X2550
PFW1315II Ф1300X1500 1200X1530 600 180-320 160-200 29.0 2700X2570X2800
PFW1318II Ф1300X1800 1200X1830 700 240-400 200-250 34.0 2700X2870X2800

If there is change of the above specification, it subjects to the newest products' specifications.